Charger for Panasonic 7.2V 9.6V 12V 14.4V 15.6V 18V 24V NiCd NiMh Li-Ion Battery
Charger for Panasonic 7.2V 9.6V 12V 14.4V 15.6V 18V 24V NiCd NiMh Li-Ion Battery

Charger for Panasonic 7.2V 9.6V 12V 14.4V 15.6V 18V 24V NiCd NiMh Li-Ion Battery

Sold out
$40.95
Shipping calculated at checkout.

  • Charges Panasonic 7.2V to 24V Batteries including 7.2V, 9.6V, 12V, 14.4V, 15.6V,  18V 24V below:

     Panasonic Pod style Ni-Cd, Ni-Mh batteries     
    e.g. EY9001, EY9005B,  EY9006B, EY9101, EY9106, EY9108, EY9117, EY9200, EY9200B, EY9201, EY9201B, EY9210,  EY9210B, EY9230B, EY9231, EY9231B, EY9240, EY9242, EY9244, EY9251, EY9251B  etc.
    Panasonic Slide style Li-Ion batteries
    e.g. EY9L40, EY9L41,  EYFB30, EY9L60, EY9L80 etc.
    *** This charger will NOT charge  EY9L42, EY9L44 or EY9L50 batteries
     

  • Battery Charger Output: 7.2 Volt to 24  Volt DC 1.5A

  • Battery  Type: Ni-Cd, Ni-Mh, and Li-Ion batteries
     Equivalent to / Replace like OEM  P/N: EY0L80,  EY0110B

     *** This universal charger  has more steady charging rate (1.5A  output) than OEM rapid chargers EY0L80 (3.75A output), which gives more protection to the batteries. Please see the charging time table below for  reference.

  • Automatic three stage mode:  Pre-charge > Constant charge > Trickle charge

    CHARGE TIME:

    Ni-Cd

    Ni-Mh

    Li-Ion

    Capacity (AH)

    1.3AH

    1.5AH

    2.0AH

    2.1AH

    2.5AH

    3.0AH

    3.3AH

    3.0AH

    Time in Mins

    52

    60

    80

    84

    100

    120

    132

    120

  • Light Indicators:
    PRECHARGE (Yellow light remains steady)
    PACK CHARGING (green light remains steady until the battery has reached 80%  of charging cpapcity, then it will blink at once per second)
    FULLY  CHARGED (green light blinks at 3 times per second)
    FAULTY BATTERY or  SHORT CIRCUIT (green light and yellow light blink at 3 times per  second)

  • Charging Protection:
    Built-in circuit protection to prevent overheating, short circuits, extended  time charging and detection of damaged batteries.
     

  • The separate universal AC adaptor/power  supply (UL,  FCC, CE, GS approved) can be used with world wide AC voltage of 100V~240V, 50~60Hz. It has an  output of 36V DC 2Amp and is plugged into the battery charger unit.
     

  • AC Plug: American type flat pin. (You will need an AC plug converter for  EU, AU outlets.)

  • Condition:
    New

  • Packing Contents:  Brand New Charger 1 pc (Non-OEM) (AC Adaptor with American Type Flat Pin Plug)

  •  

    •